Oligio Treatment Guide

*Oligio Treatment

Radiofrequency (RF) lifting is a non-invasive procedure that utilizes resistive heating generated when high-frequency current passes through skin tissue.

This thermal energy heats collagen fibers within the skin to approximately 60-70°C. This process can lead to immediate collagen contraction and stimulates fibroblasts to help generate new collagen and elastin.

1. As collagen in the dermis contracts, skin elasticity may improve immediately after the procedure.

2. With the regenerative response triggered by thermal stimulation, lifting effects can be expected starting a few weeks later.

*There are two main types of radiofrequency lifting methods.

These are Monopolar and Bipolar methods.

Monopolar is advantageous for improving deep skin layer structures,

while Bipolar can be considered suitable for managing elasticity on the skin surface.

The two methods have technical differences in energy penetration depth and thermal action range.

Appropriate application examples for each method are as follows:

1. For a double chin or sagging jawline, the Monopolar method, which allows thermal stimulation up to the fat layer, can help improve contour.

2. If the skin is thin or sensitive, the Bipolar method, which primarily acts on the superficial layers and can be applied relatively comfortably, may be considered.

3. If broad stimulation from the dermis to the fat layer is needed, such as for nasolabial folds, the Monopolar method may be suitable.

4. For improving the epidermal layer, such as skin texture, pores, or fine wrinkles, the Bipolar method, which helps restore skin density, can be expected to show results.

5. If rapid elasticity improvement is desired, the Bipolar method, which can provide an immediate tightening effect on the epidermal layer, may be chosen.

Therefore, it is crucial to carefully consider individual skin condition, age, fat amount, skin thickness, and sensitivity when selecting the appropriate lifting device.

*A treatment approach that merely emphasizes 'more than X shots' is not recommended.

Treatment methods that simply irradiate radiofrequency energy may have limited effectiveness.

The results of a true lifting procedure can vary depending on 'which area is treated, how it is treated, what energy level is used, and which other procedures are combined with it'.

The practitioner's experience and skill, as well as how the device is utilized, are crucial factors in determining the outcome of a lifting procedure.

*Oligio treatment can contribute to enhancing the longevity of effects and patient satisfaction through precise output settings, customized stimulation for each skin layer, treatment design considering directionality, and combined procedures when necessary. This goes beyond the concept of simply 'lightly tightening' the skin, serving as a 'tool for establishing a strategic lifting plan'.

It does not merely temporarily tighten the skin, but aims to create a long-term sustainable elastic structure,

which is the direction true lifting pursues.

​

Key Difference 1. Effective Intensity Control – Research Paper-Based Energy Settings

We set effective treatment intensity based on numerous papers and research data.

We do not determine the intensity of radiofrequency treatment solely based on 'not being hot' or 'without pain'.

Instead, we rely on standards presented through domestic and international academic papers and clinical data.

This takes the 'critical energy level' required to induce collagen contraction and remodeling as a significant basis.

During Oligio treatment, we use a minimum of 0.07kJ or more energy per shot (device standard level 4.5 or higher),

and the procedure is performed according to a protocol designed to ensure a total energy of 40kJ or more.

Our treatment does not merely aim for 'less painful procedures'.

We strive to perform 'procedures precisely designed according to proven energy standards'.

Within the range where patients can feel comfortable, treatment intensity is adjusted with maximum precision.

While minimizing post-treatment discomfort, we consider the effectiveness of the treatment results as a crucial value.

Oligio treatment, performed according to these standards,

can be expected to provide collagen remodeling effects.

[Hong et al., 2022 / Kim et al., 2022 / Laubach et al., 2009]

Customized Design Procedure: Careful Consideration of Facial Balance

• For improvements beyond simply tightening the skin, we offer personalized custom designs by consulting directly with the director regarding asymmetry, specific areas of concern, and areas with reduced elasticity.
• We meticulously analyze each individual's facial structure and concerns to strive for harmonious and natural lifting results.

Post-Procedure Quantity Confirmation: Transparent Procedure Guidance

• After the procedure, we will show you the exact number of shots used and guide you through the process transparently.
• We prioritize a treatment process that instills trust in our patients.

Region-Specific Resistance Adjustment for Safety and Satisfying Results

We re-measure the impedance (resistance value) of each area and adjust it to customized energy levels.

Monopolar radiofrequency is a procedure that utilizes thermal energy generated by the electrical resistance of tissues.

Since skin thickness, fat layer, blood flow, etc., vary across different facial areas, the resistance value (impedance) of each area also differs.

For this reason, the appropriate output energy required can vary for each area, such as the cheeks, forehead, jawline, and double chin.

Generally, during an Oligio procedure,

There is a tendency to apply the same energy to all areas with a resistance value set once.

This method carries the risk of excessive heat being delivered to certain areas, or conversely, insufficient heat being delivered where needed.

This can lead to variations in treatment results and sometimes raise concerns about overheating.

We re-measure impedance every time the treatment area changes,

and proceed with the treatment by correcting to the appropriate output value for each area.

Customized energy settings are made, considering the skin characteristics and resistance values of each area: forehead, chin, cheeks, and neck.

Safety is further enhanced through shot-by-shot resistance detection and manual re-setting when changing areas.

We aim for more refined results and focus on reducing the risk of side effects.

The cause of reduced skin elasticity: Consider Oligio for managing age-related changes.

As we age,

collagen production gradually decreases,

elastin structures lose their elasticity,

and the function of fibroblasts in the skin also deteriorates.

Consequently, the skin becomes thinner and tends to sag easily.

This leads to a loss of elasticity in the cheeks,

and the appearance of wrinkles and sagging around the eyes and jawline.

To improve these fundamental changes in skin structure,

surface-level care alone has its limitations,

and a fundamental stimulus that promotes collagen and elastin production is required.

Therefore, we

deliver high-frequency thermal energy deep into the skin's dermis

and recommend the 'Oligio Lifting' procedure, which contracts collagen and induces its regeneration.

Information about the Procedure

The Oligio procedure uses RF high-frequency energy to help activate collagen in the skin's dermal layer.

The heat delivered to the dermis, along with currents that are safe for the human body, denatures collagen, which can help improve double chin, alleviate skin sagging, and enhance skin texture.

A characteristic feature is that collagen gradually regenerates after the procedure, leading to continuous skin improvement.

It is a non-invasive procedure performed without anesthesia, and it has cooling and vibration modes, making the pain relatively low.

Benefits of the Procedure

• 01. Application of Pain Reduction Contact Gas Cooling and Vibration Technology
• 02. Contact gas cooling and vibration technology minimizes pain while protecting the skin surface. Thanks to this technology, high-frequency energy can be effectively delivered deep into the skin.
• 03. The impedance check function monitors the current flow status of the treatment area in real-time. This allows for the delivery of appropriate energy tailored to individual skin conditions, thereby enhancing the treatment's efficiency.
• 04. The skin temperature and tracking sensor measures the temperature of the contact area in real-time. This helps to reduce the possibility of side effects that may occur during the procedure.
• 05. The pressure sensor is designed to operate only within the set appropriate pressure range. This feature contributes to the safe progression of the procedure.

Recommended for

• 01. Those concerned about wrinkles in specific areas such as the forehead, glabella, or nasolabial folds.
• 02. Those considering overall facial skin elasticity improvement.
• 03. Those concerned about enlarged pores or uneven skin texture.
• 04. Those hoping for double chin reduction and lifting effects.
• 05. Those who feel burdened by procedures requiring a recovery period.
• 06. Those who wish to receive relatively simple lifting care without surgery or injection procedures.

Procedure Steps

• STEP 01. Cleansing before treatment
• STEP 02. Gel application to the treatment area
• STEP 03. Perform Oligio lifting treatment
• STEP 04. Treatment completion

Post-treatment Precautions

• ㆍFor individuals with thin skin, temporary tip marks may appear on the treated area. These marks generally tend to gradually subside naturally within 1-2 weeks.
• ㆍImmediately after the procedure, minor symptoms such as slight redness, warmth, throbbing, swelling, pain, or even toothache and tooth sensitivity may occur in the treated area. While these symptoms can vary individually, they typically show a gradual improvement within 1-2 weeks.