Kkeut Korean Medicine Clinic Shrink Universe Treatment

*Introduction to High-Intensity Focused Ultrasound (HIFU) Lifting

High-Intensity Focused Ultrasound (HIFU) lifting is performed non-surgically. It precisely delivers ultrasound energy to specific skin layers to promote collagen production, which can help improve skin elasticity.

Like focusing light with a magnifying glass, ultrasound energy is gathered at a specific depth within the skin. At this point, a high-temperature state is momentarily formed, creating microscopic thermal coagulation points (TCPs) in the skin tissue.

These coagulation points are exposed to heat of approximately 60-70 degrees Celsius, stimulating only the heat-focused areas while minimizing damage to surrounding tissues. This induces collagen denaturation and promotes the production of new collagen, leading to an expected improvement in skin.

HIFU treatment is one of the non-invasive devices that can deliver energy to the deep SMAS layer (fascial layer) of the skin. This SMAS layer is in the same anatomical location as the layer targeted for lifting in surgical facelifts.

When energy is delivered to the SMAS layer, tissue contraction and remodeling of collagen fibers can occur. Through this, a gradual lifting effect can be expected.

HIFU leaves almost no epidermal damage during treatment, resulting in a short recovery period. Additionally, it has the advantage of being considered for various skin types.

*Depth and Effects by Treatment Cartridge (1.5mm / 3.0mm / 4.5mm / 6.0mm)

1.5mm (Upper Dermis)

Can help manage fine lines and wrinkles on the skin surface.

Can target wrinkles in delicate areas such as around the eyes, between the brows, and around the mouth.

Contributes to skin texture refinement and pore management, and can also be considered for improving skin tone.

3.0mm (Lower Dermis)

Can contribute to improving skin elasticity in the cheek and nasolabial fold areas.

Suitable for managing early stages of skin sagging and enlarged pores.

Can help restore firmness deep within the skin.

4.5mm (SMAS Layer)

Can expect lifting of the lower face, including jowls, jawline, and double chin.

Helps improve overall sagging through tissue contraction in deeper areas.

Can expect good results when used for moderate to severe skin sagging.

6.0mm (Fat Layer)

Considered for use in areas with deep subcutaneous fat, such as a double chin.

Can also be applied to body treatments for areas such as the abdomen, thighs, and arms.

It is expected to reduce the volume of fat cells and improve overall volume by focusing on the fat layer.

Each cartridge has a different treatment purpose depending on the target skin layer.

1.5mm is useful for managing fine wrinkles and skin texture, 3.0mm focuses on enhancing skin elasticity and tightening. 4.5mm is used for deep layer lifting, and 6.0mm can be utilized for fat layer management.

*DOT Mode and MP Mode

DOT mode precisely delivers energy point by point, enabling delicate treatment designs. Through this, more precise lifting management can be expected.

It can be precisely applied to contoured or sensitive areas such as around the eyes, mouth, chin, and nasolabial folds. When utilized by an experienced practitioner, it can offer advantages for personalized lifting tailored to each individual.

MP mode delivers energy linearly at regular intervals, allowing for fast and efficient treatment of larger areas. This can help improve overall elasticity across the entire face.

It is efficient for lifting management of large areas, and is known to have relatively less pain.

Using DOT mode and MP mode together can create a synergistic effect. By combining overall contour lifting (MP mode) with detailed point lifting (DOT mode), more refined improvements can be achieved.

*Kkeut Korean Medicine Clinic's Shrink Universe

The core of Shrink Universe treatment is

1. effectively utilizing various types of handpieces, and

2. combining DOT mode and MP mode tailored to each individual patient,

to expect more satisfying results.

For areas with many curves or contours on the face, a pen-type handpiece is used for precise access, while for larger areas, MP mode is utilized to efficiently set the treatment range.

For key areas requiring lifting, DOT mode is intensively applied to add precision. Through this kind of comprehensive approach, considering individual facial characteristics, natural improvements can be expected.

The successful outcome of lifting depends on the depth of energy delivery, the precise manipulation of the handpiece, and the balance of the treatment mode. Delicate design beyond mere treatment is crucial.

Some people desire a natural yet delicate lifting effect, or wish to receive treatment without the burden of recovery time. If you want to improve overall skin elasticity reduction or sagging, you might consider the Shurink Universe treatment.

Is Shurink Universe less effective than Ultherapy?

To get straight to the point,

If the treatment is performed under the same conditions (output, depth, number of shots),

Shurink Universe treatment and Ultherapy treatment can be expected to have similar effects.

Both devices use High-Intensity Focused Ultrasound (HIFU) to

deliver thermal energy to the deep tissues of the skin (SMAS layer),

and through this action, stimulate collagen contraction and regeneration, thereby achieving a lifting effect.

For example,

Shurink Universe (Dot Mode) 1.0j x 300 shots

In the case of Ultherapy 1.0j x 300 shots, both accumulate a total of 300j of energy.

The duration of HIFU treatment effectiveness depends less on the name of the device used for the treatment,

and more on how well the skin tissue responds to thermal coagulation.

At this time, the degree of thermal coagulation response in the skin tissue

is determined by the total amount of focused ultrasound energy.

Treatment Guide

1. Shurink Universe treatment utilizes HIFU (High-Intensity Focused Ultrasound) technology. This procedure focuses energy on the SMAS layer of faces that have lost elasticity and sagged due to aging. Through this, it regenerates collagen and induces contraction of lax tissues, thus expecting overall elasticity improvement.

2. Compared to the existing Shurink, the treatment speed has improved by more than double. The Ultra Booster pen-type handpiece delivers ultrasound energy more precisely not only to the V-line, cheeks, and cheekbones but also to curved areas and around the eyes. This can help with a more meticulous lifting treatment.

3. Thanks to the faster ultrasound irradiation speed, treatment time can be shortened. Reduced pain burden can help you receive treatment more comfortably. Furthermore, the energy that generates approximately 400 thermal coagulation points per shot can be expected to enhance the effect.

Treatment Advantages

·         01. Delivers concentrated energy through approximately 400 thermal coagulation points.

·         02. Utilizes two ultrasound modes, selectable according to skin condition and treatment area.

·         03. Allows for delicate lifting even on small, curved areas.

·         04. The bidirectional irradiation method speeds up treatment and reduces pain burden, helping to improve skin elasticity.

Recommended for

·         01. Those concerned about changes in their impression due to a sagging face line.

·         02. Those who desire delicate lifting even on small, curved areas, along with an overall elastic face line.

·         03. Those concerned about wrinkles due to aging.

·         04. Those who expect more delicate and effective lifting than the existing Shurink.

Treatment Process

·         STEP 01. Self-cleansing

·         STEP 02. Gel application

·         STEP 03. Shurink Universe procedure

·         STEP 04. Finishing

Post-treatment Precautions

ㆍIf your skin is thin, tip marks may appear on the treated area. These marks tend to naturally subside within 1-2 weeks.

ㆍAfter the procedure, mild symptoms such as slight redness, warmth, throbbing, swelling, pain, toothache, or tooth sensitivity may appear in the treated area. While these symptoms vary by individual, most can gradually subside within 1-2 weeks.

Customized Output Control – Considering Pain and Efficacy in Treatment

·         Shurink may have different output characteristics compared to Ultherapy, so it is important to finely adjust the output intensity according to each individual's skin condition during treatment.

During the procedure, we continuously communicate with the patient to check for pain responses and adjust the device output accordingly. This can help maintain comfort and achieve satisfactory treatment results.

Ulthera Mode (Dot Output) Combination: Enhanced Lifting Effect

The Shurink Universe device typically delivers ultrasonic energy in a linear fashion. This method allows thermal energy to spread more broadly compared to devices that deliver energy in a dot-like form.

However, Shurink also has an Ulthera mode that delivers dot-shaped ultrasound. Utilizing this mode allows energy to be concentrated on the necessary areas, leading to more distinct lifting improvements.

Most medical institutions may hesitate to use dot output in combination, considering that it takes more time. However, at our clinic, we strive to enhance the precision of the procedure by additionally applying Ulthera mode according to the patient's needs.

The Importance of Precise Treatment Design: Accurate Delivery to Necessary Areas

Even with a small number of shots, the procedure is carried out through a meticulous treatment design process, considering facial asymmetry and aiming for lifting improvement.

Rather than simply using a predetermined number of shots, we carefully plan and design where to concentrate the energy, which can lead to more satisfactory results.

Delicate Tip Direction Adjustment Technique

Precise Tip Direction Setting

Considering the contours of the face and the effects of gravity, we plan to deliver the tip in a diagonal or upward direction.

This adjustment helps the ultrasound energy work in a way that lifts the skin.

Through this, we can expect a more natural tightening effect.

A delicate approach that considers even the tip's direction during Shurink treatment is a crucial part of increasing patient satisfaction.

* Tilt & Push-up Technique Application

During the procedure, instead of simply placing the tip perpendicularly on the skin,

we lightly push the skin upwards with the tip slightly tilted while performing the treatment.

This technique encourages the ultrasound coagulation points to settle in a direction that pulls the skin upwards.

This can contribute to a natural lifting effect of the facial line.

Related studies have also reported that such techniques can positively influence lifting improvement.

By considering even these minute details, we don't just stop at creating a treatment plan; we ensure that the planned design is fully implemented during the actual procedure, helping to achieve the desired results.